|
How
to Order
Price List
Distributors
MSDS |
|
Another
Exciting Product!
Corrosion Technologies Corporation, makers of CorrosionX, now brings
you MaxWax, a unique, synthetic wax-barrier coating that provides maximum
protection of all metals. MaxWax is effective in temperatures ranging
from -60° F (-50° C) to over 390° F (200°C). It dries to a smooth, non-tacky,
waxy film that remains pliable throughout its full operating range.
It is resilient and bends with any movement of the coated surface, will
not crack under stress and maintains its protective coat intact.
FAST DRYING
MaxWax dries in 8 to 24 hours, depending on ambient temperature and
humidity. It should be sprayed on to a film thickness of 2-3 mils for
uncovered outdoor storage of equipment. Unlike usual wax coatings, MaxWax
will not harden, crack or lose flexibility even in sub-zero temperatures.
It penetrates between and around close-fitting components to prevent
the incursion of corrosion-causing moisture, gases or chemicals. What<s
more, It is a Vapor Corrosion Inhibitor (VCI) that provides added rust
or corrosion protection when the product is applied to confined areas
such as the inside of cabinets or other enclosures. This special vapor
forms an invisible, monomolecular coating that extends protection even
where the wax coating cannot reach or is not desired, such as on electrical
switches or mechanisms.
CHARACTERISTICS:
Non-Toxic: MaxWax contains no chromates, nitrites, nitrates or heavy-metal
compounds. Biodegradable: The product is organically-based and poses
no waste disposal problems. Concentrated: Excessive amounts of MaxWax
are unnecessary, making it less expensive than other barrier coatings.
HOW TO USE MaxWax can be used on machined, plated or other metal surfaces
as well as over existing coatings/finishes. The product will outperform
many traditional paints or coatings without any special surface preparation
required, although removal of dirt, grease or loose rust is recommended.
A light, uniform coat is best achieved by spraying at a distance of
10 - 12 inches from the surface to be treated. Allow 8 - 24 hours for
complete drying. |
|
